Contact Us

TEL: +86-574-86159088
Fax: +86-574-86158328
E-mail: xuhong@cn-tianhui.com
Address: Hongxi Industrial Park No.12th ,Chunhu Town, Fenghua District  ,Ningbo ,Zhejiang Province,China 

Home > Knowledge > Content
CNC Machining Knowledge
Jan 10, 2019

  CNC Machining Knowledge

As CNC Machining , if you don't know this filed , won't know it . However , if you work on this filed , you must know some knowledge of it . The follow are jsut a part , I will show more next time .

When a CNC system is activated, the desired cuts are programmed into the software and dictated to corresponding tools and machinery, which carry out the dimensional tasks as specified, much like a robot.

In CNC programming, the code generator within the numerical system will often assume mechanisms are flawless, despite the possibility of errors, which is greater whenever a CNC machine is directed to cut in more than one direction simultaneously. The placement of a tool in a numerical control system is outlined by a series of inputs known as the part program.

With a numerical control machine, programs are inputted via punch cards. By contrast, the programs for CNC machines are fed to computers though small keyboards. CNC programming is retained in a computer’s memory. The code itself is written and edited by programmers. Therefore, CNC systems offer far more expansive computational capacity. Best of all, CNC systems are by no means static, since newer prompts can be added to pre-existing programs through revised code.


Previous: Processing method for failure of servo machining center of CNC machining center

Next: Difference between Precision Machinery Parts and mechanical metalworking