Contact Us

TEL: +86-574-86159088
Fax: +86-574-86158328
Address: Hongxi Industrial Park No.12th ,Chunhu Town, Fenghua District  ,Ningbo ,Zhejiang Province,China 

Home > Knowledge > Content
CNC machining specific treatment principles
Dec 21, 2017

(1) in order to ensure processing precision, coarse and fine processing should be carried out separately. Because of the rough machining, cutting a large amount of workpiece by the cutting force, clamping force, heat, and surface hardening are remarkable, the workpiece exists inside the large internal stress, if the coarse and rough machining is continuous, fine machining of precision parts for re distribution of stress and quickly lose. For some parts with high processing precision. Before and after rough processing, low temperature annealing or aging treatment should be arranged to eliminate internal stress.

(2) reasonable selection of equipment. Rough machining mainly cuts off most of the machining allowance and does not require higher machining accuracy. Therefore, rough machining should be carried out on machine tools with large power and low accuracy. Finishing process requires higher accuracy machine tools. Rough and fine machining are processed on different machine tools, which can not only give full play to equipment capacity, but also prolong the service life of precision machine tools.

(3) the process of heat treatment is often arranged in the process of mechanical processing. The arrangement of heat treatment process location is as follows: in order to improve the cutting performance of metal, such as annealing, normalizing, quenching and tempering, etc., it is usually arranged before machining. In order to eliminate internal stress, such as aging treatment, conditioning treatment, etc., it is generally arranged before rough processing and before finishing. In order to improve the mechanical properties of parts, such as carburizing, quenching, tempering and so on, it is generally arranged after mechanical processing. If the heat treatment has large deformation, it is necessary to arrange the final processing procedure.

Previous: Thermal conductivity and application of Aluminium Casting Part

Next: CNC machine tools are widely used in the power equipment industry